Insta-Valve 250

250 psi working pressure
Requires no system shutdown
Eliminates 100 percent of the costs related to shutting down a system
Exceeds AWWA C509/515 Proof of Design Standards
Maintains NSF 61 and ANSI 372 certification by UL
Stainless steel construction
Permanent asset for site-specific control
Can be installed on all common pipe types in any orientation in as little as 2 hours
No need to ream or sever the pipe, only a single tap needed for installation
AIS-compliant option available
Bevel gear available for horizontal installation

Notes:
250 Psi working pressure — 1: Does not apply to the Insta–Valve 20–24, which is rated to 150 psi.

Maintains NSF 61 and ANSI 372 certification by UL — 2: UL certification for the Insta–Valve 250 valves only.

Stainless Steel Construction — 3: Does not apply to the Insta–Valve 20–24, which is made of ductile iron with a fusion–bonded epoxy coating.

Can be installed on asbestos cement, cast iron, ductile iron, steel, and PVC pipes in any orientation — 4: Does not apply to the Insta–Valve 20–24, which can only be installed on cast or ductile iron pipes in the vertical or horizontal position.

DOCUMENTS

Submittals

Specifications

HOW IT WORKS

The installation of the Hydra-Stop Insta-Valve 250 insertion valve is accomplished through a single circular hole — commonly known as a “tap” — cut under full line pressure into the top of the pipe without the need to ream or sever the pipe. By installing the Insta-Valve 250 right where a control point is needed, you gain a permanent asset allowing system control and maintenance in the same manner as a resilient seated gate valve.

Contact

Contact your local Koppl Pipeline Services representative.

Give us a call today to see what process can offer the best solution to your need.